Modeling Smart Grids as Complex Systems Through The Implementation of Intelligent Hubs Jose Gonzalez de Durana, Oscar Barambones (University College of Engineering, University of the Basque Country); Enrique Kremers, Pablo Viejo (European Institute for Energy Research - EIFER). 7th International Conference on Informatics in Control, Automation and Robotics (ICINCO), Funchal, Madeira (Portugal), June 15-18 2010.

The electrical system is undergoing a profound change of state, which will lead to what is being called the smart grid. The necessity of a complex system approach to cope with ongoing changes is presented: combining a systemic approach based on complexity science with the classical views of electrical grids is important for an understanding the behavior of the future grid. Key issues like different layers and inter-layer devices, as well as subsystems are discussed and proposed as a base to create an agent-based system model to run simulations.
» 続きを読む

Object oriented simulation of Hybrid Renewable Energy systems focused on Supervisor Control Jose Maria Gonzalez de Durana, Oscar Barambones (Universidad del Pais Vasco). IEEE Int. Conf. on Emerging Technologies and Factory Automation Proceedings of the IEEE Int. Conf. on Emerging Technologies and Factory Automation, Palma de Mallorca, 22/09/2009

With eyes focused on simulation the authors review some of the main topics of Hybrid Renewable Energy Systems (HRES). Then they describe an Object Oriented model of a simple example of one of such systems, a micro-grid, oriented to designing a decentralized Supervisor Control. The model has been implemented using AnyLogic.
» 続きを読む

Complete Agent Based Simulation of Mini-Grides J.M. Gonzalez de Durana, O. Barambones, Enrique Kremersy, and Pablo Viejo (Universidad del Paıs Vasco, European Institute for Energy Research - EIFER EDF and the University of Karlsruhe). Ninth IASTED European Conference on Power and Energy System, Palma de Mallorca, 07/09/2009

With eyes focused on simulation we review some of the main topics of Hybrid Renewable Energy Systems (HRES). Then we describe an Agent Based model of a simple example of one of such systems, a micro-grid, oriented to designing a decentralized Supervisor Control. The model has been implemented using AnyLogic.
» 続きを読む

A Complex Systems Modelling Approach for Decentralized Simulation of Electrical Microgrids Enrique Kremers and Pablo Viejo (European Institute for Energy Research - EIFER EDF and the University of Karlsruhe); Oscar Barambones and Jose Gonzalez de Durana (University College of Engineering University of the Basque Country). Engineering of Complex Computer Systems (ICECCS), 2010 15th IEEE International Conference on, 22-26 March 2010.

The structure and behavior of Electrical Grids share many of the properties of Complex Computer Systems, with microgrids and other decentralized electrical systems attached to them, so they can be interpreted as Systems of Systems. Furthermore, the evolution of the future electrical system will bring a higher degree of decentralization concerning specially production and control. To deal with this paradigm change, new models and tools are necessary. In this paper a model of an electrical microgrid is presented.
» 続きを読む

An Agent-Based Multi-Scale Wind Generation Model Enrique Kremers, Norbert Lewald (European Institute for Energy Research); Oscar Barambones, Jose Maria Gonzalez de Durana (Universidad del Pais Vasco). Kremers, E., Lewald, N. IASTED EuroPES 2009, Palma de Mallorca, Spain, September 7 – 9. (2009).

This paper presents an agent-based model for simulating wind power systems on multiple time scales. The aim is to generate a flexible model that allows us to simulate the output of a wind farm. The model is developed using multiparadigm modelling, combining different approaches such as agent-based modelling, discrete events and dynamic systems.
» 続きを読む

A Detailed Model For a High-Mix Low-Volume ASIC FAB Mike Gissrau, Oliver Rose. Proceedings of the 2011 Winter Simulation Conference

Looking for new improvement options such as new dispatching rules of an existing semiconductor fabrication facility, a detailed model is indispensable to check the data quality as well as detecting main influences of the facility and finally testing the new optimization approaches.
» 続きを読む

A Generic Operational Simulation for Early Design Civil Unmanned Aerial Vehicles Benjamin Schumann, Jim Scanlan (School of Engineering Sciences University of Southampton); Kenji Takeda (Microsoft Research). Proceedings of the SIMUL 2011: The Third International Conference on Advances in System Simulation

Contemporary aerospace programmes often suffer from large cost overruns, delivery delays and inferior product quality. This is caused in part by poor predictive quality of the early design phase processes with regards to the operational environment of a product. This paper develops the idea of a generic operational simulation that can help designers to rigorously analyse and test their early product concepts. The simulation focusses on civil Unmanned Air Vehicle products and missions to keep the scope of work tractable.
» 続きを読む

Simulazione discreta con il software AnyLogic. Caratteristiche generali e applicazione ad unostudio oculistico Mattia Munaro, the University of Padua, Faculty of Engineering, 2009-2010

AnyLogic è un ambiente di modellazione virtuale di sistemi discreti, continui ed ibridi. Con questo strumento è possibile creare prototipi di sistemi durante le fasi di studio, progettazione o sviluppo, attraverso cui esplorare aspetti e dettagli della progettazione o della implementazione dei relativi sistemi in modo semplice e privo di rischi
» 続きを読む

Application of AnyLogic simulation tool in the sphere of banking

This paper contains some banking issues that can be successfully resolved by the users of AnyLogic – multimethod simulation tool. The list of issues is not exhaustive, it reflects some tasks that have been discussed by XJ Technologies and AnyLogic users - banking organizations.
» 続きを読む

Utilising dynamic factory simulation to improve unit cost estimation and aid design decisions Stuart Jinks, Jim Scanlan, Philippa Reed (University of Southampton); Steve Wiseall (Rolls-Royce plc). Proceedings of the 2010 Winter Simulation Conference.

Utilising dynamic simulation methods to estimate manufacturing resources, can improve unit cost estimation and aid design decisions. This paper introduces a framework specification that combines Computer Aided Design (CAD), Computer Aided Process Planning (CAPP) and Discrete Event Simulation (DES) technologies.
» 続きを読む